| Internal
Sampling Clock |
200MHz,
100MHz, 50MHz, 25 MHz, 10MHz, 5MHz, 2.5MHz, 1MHz, 500kHz, 250 kHz, 100kHz,
50kHz, 25kHz, 10kHz, 5kHz, 2.5kHz, 1.25kHz |
| Stability |
100
PPM |
| Digital
Logger Clock |
|
| Rates |
Log
rate: 5 seconds to 1 hour in 1 second steps |
| Stability |
Logger
timing obtained from PC |
|
External clock input
|
Clock
on rising/falling edge, 25 MHz max. |
| Digital
channels |
16
Inputs, 0 to 7V, 100 kOhm / 8 pF input impedance, 40 MHz input bandwidth |
|
Data buffer
|
|
| Size |
130000
(decimal) samples per channel |
| Pre/post-trigger
buffer |
Data
buffer is divided in a Pre- and post trigger section, which sizes can be
set in 1000 bytes steps |
|
Threshold voltage
|
1V,
1.3V, 1.5V, 1.7V, 2.0V, 2.2V, 2.4V ± 3% |
|
Extended capture time
|
Varies
depending on the sampling rate; 200MHz: 10 ms max ... 1.25kHz: 1677s max |
|
Trigger conditions |
|
|
Pattern
|
"1",
"0" and "don’t care" conditions selectable on all
channels |
| Edge |
On
any one channel. Rising edge, falling edge, or change-of-state |
| Edge/Pattern
combinations |
edge
up, edge down, edge up OR edge down (change-of-state) |
|
pattern |
|
pattern
OR edge up/edge down/change-of-state |
|
pattern
AND edge up/edge down/change-of-state |
|
pattern
THEN edge up/edge down/change-of-state |
|
edge
up/edge down/change-of-state THEN pattern |
|
pattern
< duration (glitch capture). Duration ±20ns tolerance, 1 ms max. |
|
pattern
> duration. Duration ±20ns tolerance, 1 ms max. |
|
Continuous
|
Unconditionally:
Screen updates at regular intervals |
|
Conditionally:
Display updates on set Edge/Word trigger condition |
|
Mouse/Keyboard |
A
trigger may be forced |
| Display |
digital,
2 levels |
| No.
of channels |
Any
number may be displayed at a time |
| Channel
Names |
User
specified |
| Display
Order |
User
specified |
| Zooming |
Zoom
from single samples to all. Zoom in, out, previous, all, between cursors |
| Continuous
data display |
Screen
updates conditionally or unconditionally |
|
Cursors
|
X,
Y, Z-cursors and T-trigger line, signal values at X and Y intersects shown |
|
Time measurements
|
Between
any two cursor lines or cursor line and trigger line |
|
Edge snapping
|
Cursors
snap to exact edges in data, measurements are taken to/from. Indicated on
screen |
|
Word search
|
"1",
"0", and "don’t care" conditions specified, also
repeated search |
|
Text display
|
Hexadecimal
and binary formats |
| Trigger
indicator |
Trigger
LED on the unit is mirrored on the main screen |
| Beep
on trigger |
On/Off |
|
Debugging PC controlled units |
Run
the TE7100 and the Unit Under Test software (if the UUT is PC base) from
the same PC. |
|
No
second PC is required. |
|
The
UUT software may be launched from within the TE7100 software |
|
Printed output |
Timings
print, bitmap, Text: Hexadecimal and binary formats. Portrait or landscape |
|
Files |
Signal
files: contains captured data, date stamp, time stamp, user information
(e.g. heading,
comments, etc.), channel name, cursor positions, software configuration,
etc. |
|
When
a signal file is reloaded the machine and software and data is set as when
the file was saved. Bitmap files: Bitmap of the main screen/ Bitmap
similar to print presentation. |
|
Text
files: Hexadecimal format |
|
Configuration
files: Software configuration. Autosave configuration option |
|
LED indicators |
Power,
trigger |
|
Port settings |
$278
(LPT2), $378 (LPT1), $3BC (LPT3) |
|
Power requirements |
Regulated
5V ±3% supply: |
|
4.5
W Active Capturing |
|
1
W Power On But Not Capturing |
|
Power
(+5V) supplied by regulated supply |
|
Dimensions |
|
| height |
26
mm |
| length |
150
mm |
| width |
86
mm |
| weight |
200
gram |
| Cable
lengths Signal, Power |
1.5
- 1.8m |
| Operating
temperature |
10°C
- 40°C (50°F-105°F) |
