|
|
|
|
|
|
|
Pricing And Ordering Information Is Now Available On-Line At Our E-Commerce site: Search for the product model number that you are interested in.
Continue To Scroll Down This Page For Product Information Only. ==============================================================
|
|
TS-C-AD218 |
24-bit 16-Channel, 8-DIO ADC DAQ PC Card |
|
|
|
|
|
DescriptionThe AD218 uses a 24-bit Sigma Delta A-to-D converter to produce very high resolution measurements, typically up to 21 effective bits when sampling at 50 or 60Sample/sec. The card consumes very little power and so is ideal for portable instrumentation. |
|
|
|
Technical Features |
|
|
|
24-bit Sigma Delta A-to-D converter, optimized for sample rates of less than a few hundred samples per second. Max sample rate is 1KSample/sec at reduced resolution. |
|
|
16-channel fault protect input mux switchable between single ended and differential topology. |
|
|
Input ranges are software configurable from +2.5V/-2.0V down to +/-19.5mV in bipolar mode, or from 2.5V to 19.5mV in unipolar mode. |
|
|
Power is available at the edge connector for signal conditioning, powering sensors etc. |
|
|
Built in 16-bit counter with clock and gate inputs for event monitoring. |
|
|
8 general purpose digital I/O lines are available for control and status monitoring, each being programmable as input or output and having TTL compatible input thresholds, and CMOS type output drive capability. |
|
|
Card comes with Elan's Card Center Pro software with kernel driver and data handling module, plus a top level Win32 GUI with source code to act as a starting point for your own development. Full hardware register data is provided to allow exact tailoring for bespoke applications. |
|
|
Drivers for DOS, Win9x, Me, NT4, 2000, XP. (DOS support requires Card and Socket Services e.g. SystemSoft or Award). |
|
|
Automatic O.S. recognition and configuration. Hot swappable PCMCIA 2.1+ compliant TypeII design. |
|
|
Power consumption: 20mA at 5V fully active. |
|
|
Input mux channels can withstand voltages up to +/-35V with the card powered or +/-25V if not powered. |
|
|
Supplied with 1m Type30 cable. Connector latches into PC Card for security. Terminates to DB37 Female with male screw jacks. Custom cabling available on request |
|
|
Can be fitted with a unique Strain Relief Assembly to ruggedize the PC Card to cable connection (optional extra), product code "TSRA1-DAQ" |
|
|
||||||
Ordering Information
|
||||||
|
|
|
|
Please
E-mail Or Call For Pricing, Lead Time And Shipping Fees.
|
|
|
All
trademarks used in this data sheet are registered trademarks of the
relevant firms. LabView® and LabWindows® are registered trademarks of
National Instruments Corp. |
|