|
|
|
|
|
|
Pricing And Ordering Information Is Now Available On-Line At Our E-Commerce site: Search for the product model number that you are interested in.
Continue To Scroll Down This Page For Product Information Only. ==============================================================
|
|
TS-C-AD132 |
250 KS/s 12-bit 16-Channel ADC DAQ PC Card |
|
|
|
|
|
DescriptionThe AD132 is a versatile high speed Data Acquisition (DAQ) PC Card. It can digitize with a resolution of 12-bits at up to 250KSamples/s. The card comes with Win32 application source code, device drivers and full register programming details. Some of its features are listed below. |
|
|
|
Technical Features |
|
|
12-bit 250KSample/s successive approximation A-to-D converter with excellent noise performance and up to 11.2 effective bits of resolution. The sample rates are programmable for continuous sampling as well as allowing conversions under host software control. |
|
|
16-channel fault protect input mux, with channel scanning logic, and switchable between single-ended and differential topology. |
|
|
20 software programmable inputs ranges from +/-10V to +/-625mV. Unipolar and bipolar modes are globally software selectable. |
|
|
A-to-D data flows into a large 16KSample FIFO on-card. The FIFO can be run in continuous streaming mode (throughput is PC speed dependent) but can also serve as a capture buffer for triggered acquisitions. This is similar to a digital storage oscilloscope, with level and edge triggering against a digital 8-bit threshold in hardware, and programmable pre or post triggering to allow waveform capture before/after a trigger event. These features are seldom found in PC Card DAQ solutions, making this card unique in its class. |
|
|
A digital trigger input is also provided to allow burst acquisition to be triggered by an external event or process. |
|
|
8 general purpose digital I/O lines are available for control and status monitoring, each being programmable as input or output and having TTL compatible input thresholds, and CMOS type output drive capability. |
|
|
Power is available at the edge connector for signal conditioning, powering sensors etc. |
|
Card comes with Elan's Card Center Pro software with kernel driver and data handling module, plus a top level Win32 GUI with source code to act as a starting point for your own development. Full hardware register data is provided to allow exact tailoring for bespoke applications. |
|
|
Drivers for DOS, Win9x, Me, NT4, 2000, XP. (DOS support requires Card and Socket Services e.g. SystemSoft or Award). |
|
|
Automatic O.S. recognition and configuration. Hot swappable PCMCIA 2.1+ compliant TypeII design. |
|
Power consumption: Typical 200mA at 5V fully active, with support for reduced power sleep mode of typ. 20mA at 5V under host application software control. |
|
Input mux channels can withstand voltages up to +/-35V with the card powered or not. |
|
Supplied with 1m Type30 cable. Connector latches into PC Card for security. Terminates to DB37 Female with male screw jacks. Custom cabling available on request |
|
|
Can be fitted with a unique Strain Relief Assembly to ruggedize the PC Card to cable connection (optional extra), product code "TSRA1-DAQ" |
|
|
|||||||||
Ordering Information
|
|||||||||
|
|
|
|
Please
E-mail Or Call For Pricing, Lead Time And Shipping Fees.
|
|
|
All
trademarks used in this data sheet are registered trademarks of the
relevant firms. LabView® and LabWindows® are registered trademarks of
National Instruments Corp. |
|
