Pricing

And Ordering Information Is Now Available On-Line

At Our E-Commerce site:

www.TeamPCTechnology.com

Search for the product model number that you are interested in.

 

Continue To Scroll Down This Page For Product Information Only.

 

DAQ pci508, DAQ pci508-MF

500 kHz data acquisition PCI board

  • 500kS/s multifunction data acquisition card with 32 bit VXD driver for Microsoft® Windows® 95/98 and kernel driver for Microsoft® Windows NT® and Windows® 2000 operating systems.
  • 12 bit ADC with 8 single-ended or 4 differential analog input channels with trigger and pre-trigger functions.
  • Built-in anti-aliasing filter (Cutoff frequency 320kHz ±20%, attenuation 60db per decade).
  • Unipolar input ranges: +1.25V +2.5V +3.75V +5.0V +6.25V +7.5V +8.75V +10V
  • Bipolar input ranges ±0.625V ±1.25V ±1.875V ±2.5V ±3.125V ±3.75V ±4.375V ±5.0V ±5.625V ±6.25V ±6.875V ±7.5V ±8.125V ±8.75V ±9.375V ±10V.
  • Single-ended or differential operation.
  • All ranges and operation mode can be set by software.
  • Standard cards: 8 digital I/O ports, TTL compatible, 4mA maximum current
  • Multifunction cards: 4 digital I/O ports, TTL compatible, 4mA maximum current, 2 x 12 bit D/A converters, ±10V and +2.5V single-ended output voltage range.
  • Multiple sensor supply voltages: +5V/200mA, +15V/10mA, -15V/10mA
  • PCI bus interface for high-speed transfer and continual sampling without interruption, amount of data depends only on hard disk capacity.

Features

The DAQ pci508 is a high speed data acquisition card for desktop computers. It offers 8 single-ended (4 differential) inputs. All input channels are multiplexed on a 12 bit A/D converter. The maximum conversion rate is 500kHz. In addition, there are 8 digital, TTL compatible, inputs and outputs.

Optionally, the card can be equipped with 2 asynchronous 12 bit D/A converters in turn for 4 digital I/O ports. The D/A converters are suitable for voltage output and for low speed closed loop applications.

The card can be operated using Microsoft® Windows® 95/98/ME, Windows NT® and Windows® 2000 operating systems. For instant use, FreeVIEW provides a graphical environment.

Applications

The DAQ pci508 can be used in many environments for automation of machines, process monitoring and control, instrumentation and electronic test functions.

Analog Input

All analog input channels have an input impedance of 10 MOhm with an input capacity of 20pF. All inputs are provided with overvoltage protection up to +/-35V.

The conversion rate ranges from 0.5Hz (305Hz with trigger condition) to 500kHz and can be set by software. Triggering and sampling is controlled by card's hardware entirely.

The pci508 can acquire data in the sampling modes:

  • Individual sampling of various channels.
  • Alternate sampling of all or a subset of channels.
  • As above, but with triggering (signal edge or threshold value). Pretrigger is adjustable. Recording depth is 16384 values.
  • Sampling at intervals set by controlling software.

Trigger

The start of the data acquisition is triggered by level or signal edge. It can be triggered when there is a fall below or a rise above a certain level. Also, the trigger can be set by recognition of a falling or rising signal edge.

Since the trigger is hardware controlled, no time delay arises between a triggering condition and the start of recording. This eliminates the loss of data during the trigger state.

Digital I/O

8 (multifunction cards: 4) digital I/O lines provide TTL compatible level, the maximum current is 4mA.

Connector

A standard 37 pole D-SUB connector (jack type) is used for accessing the analog inputs and digital inputs and outputs.

In addition, multiple supply voltages (5V/200mA, -15V/1mA, +15V/1mA) and an external trigger input are available.

Software/Drivers

The card can be operated using Microsoft® Windows® 95/98/ME, Windows NT® and Windows® 2000 operating systems

Ordering Information

DAQ pci508 PCI bus card, 8 analog input channels.  These Cards Are Discontinued and Replaced With i616 Series. Order Online At www.TeamPCTechnology.com  Search For i616 and P111 to make the PCI Card Combination.
DAQ pci508-MF PCI bus multifunction card, 8 analog input channels, 2 D/A output channels.  These Cards Are Discontinued and Replaced With i616 Series. Order Online At www.TeamPCTechnology.com  Search For i616 and P111 to make the PCI Card Combination.

Accessories

Terminal Block, Cables, etc.

 

Please E-mail Or Call For Pricing, Lead Time And Shipping Fees.
sales@team-solutions.com
Phone: 949.348.7766 • Fax: 949.348.7776
Now Accepting


Copyright Team Solutions 2001
Problems with aTeamSolutions.com, Team-Solutions.com, please email:
webmaster@team-solutions.com
No information here may be reproduced or distributed in any form or by any means without prior permission
from TEAM Marketing, TEAM Solutions Laguna Hills, California, USA.
Please report trouble with the web pages to the webmaster. Thank you.

This site was designed by Duncan Asper 949 458-0477 @ www.whitespace.ws

All trademarks used in this data sheet are registered trademarks of the relevant firms. LabView® and LabWindows® are registered trademarks of National Instruments Corp.
Microsoft® Windows®, Windows NT®, Visual Basic® and Visual C++® are either registered trademarks of Microsoft Corporation in the United States and/or other countries.
Our continuous product improvement makes specifications subject to change without notice.