Pricing

And Ordering Information Is Now Available On-Line

At Our E-Commerce site:

www.TeamPCTechnology.com

Search for the product model number that you are interested in.

Continue To Scroll Down This Page For Product Information Only.

DAQ pci218

High Performance Data Acquisition PCI

• 24 bit sigma-delta A/D converter (Analog Devices AD7710 converter chip).
• Built in multiplexer: 16 single-ended or 8 differential A/D channels
• Resolution 7.5 digits (exact unscaled reading range from 0 to 16777215). Even in the 2.5V range resolution is better than 1uV!
• Sum sampling rates 10Hz to 1000Hz.
• Ranges available +/-2.5V to 20mV (!).
• Accuracy +/-0.2% (2.5V range).
• All functions software selectable.
• Automatic software calibration feature make unit "potfree". Background calibration mode for automatic removal of temperature drift effects. The remaining drift is 10ppm/K
• Low power consumption: 100mW (5V,20mA) typ.
• 8 digital I/O lines with pull up / pull down resistors. Open drain mode sinks up to 4mA. All digital inputs are protected to +/-25V relative to cards ground.
• Sensor excitation currents: 100nA and 0.02mA available
• Reference voltage (2.5V) and +5V/200mA, -5V/5mA for power supply of external devices available
• Custom C++ drivers for SCO UNIX, Solaris, HP-UX, OSF/1, pSOS, OS9, LynxOS etc. on request.

Features

The DAQ pci218 PCI board has a 24 bit sigma-delta A/D converter chip and a built in multiplexer with 16 single-ended or 8 differential analogue input channels with sum sampling rates from 10Hz to 1000Hz. Also included is a digital I/O port. 8 lines can be used for input or output. A built-in 16 bit counter, used for impulse counting or frequency measurement up to 6MHz, completes the design.

The card works with Microsoft® Windows® 95/98/ME, Windows NT® and Windows® 2000 operating systems.

Applications

The multichannel analog inputs can be used for voltage measurement, temperature measurement (Thermocouple), curve printing and data logging. The 8 digital I/O lines can be ued for machine and process control,switching external devices such as solid-state-relays or reading the status of external digital logic.

A single PCI card replaces a DVM application: DVM with an accuracy of 4 1/2 digits, a 16 channel scanner/multiplexer and a IEEE488 interface card.

Self Calibration

The analog inputs of the DAQ pci218 have self calibration circuitry built into the A/D converter to correct gain and offset errors. You can calibrate out additional analog I/O errors caused by time and temperature drift at runtime through software to accommodate changing environmental conditions. No external circuitry is necessary. The internal reference ensures high accuracy and stability over time and temperature.

Software/Drivers

The card works with Microsoft® Windows® 95/98/ME, Windows NT® and Windows® 2000 operating systems.

• PCI bus card with 32 bit VXD driver for Microsoft® Windows® 95/98 and kernel driver for Microsoft® Windows NT® and Windows® 2000 operating systems.
• Direct driver adaptation with ready to run applications and ON-LINE help for Borland C++, Borland Delphi, DASYLab, Agilent VEE / HP VEE / DT VEE, HTBasic, LabVIEW, Testpoint, Microsoft® Visual Basic® and Microsoft® Visual C++®.
• Easy installation: SETUP program helps installing drivers, Online-Help, test and example programs.

Ordering Information

All trademarks used in this data sheet are registered trademarks of the relevant firms. LabView® and LabWindows® are registered trademarks of National Instruments Corp.
Microsoft® Windows®, Windows NT®, Visual Basic® and Visual C++® are either registered trademarks of Microsoft Corporation in the United States and/or other countries.
Our continuous product improvement makes specifications subject to change without notice.